A calibration kit is a set of physical calibration standards for a particular connector type. The magnitude and phase response of the calibration standards (i.e. their S-parameters) must be known or predictable within a given frequency range.
The standards are grouped into several types (open, through, match,...) corresponding to the different input quantities for the analyzer's error models. The standard type also determines the equivalent circuit model used to describe its properties. The circuit model depends on several parameters that are stored in the cal kit file associated with the calibration kit.
As an alternative to using circuit models, it is possible to describe the standards by means of S-parameter tables stored in a file.
The analyzer provides a large number of predefined cal kits but can also import cal kit files and create new kits:
A selection of predefined kits is available for all connector types. The parameters of these kits are displayed in the Add/Modify Standards dialog, however, it is not possible to change or delete the kits.
Imported and user-defined kits can be changed in the Calibration Kits dialog and its various sub-dialogs.
Calibration kits and connector types are global resources; the parameters are stored independently and are available irrespective of the current setup.